Ventis Subfloor System

Ventis Subfloor System

$1,936.00$3,322.00

Is your home excessively damp or mouldy and you cannot figure out why?

If you do not have subfloor ventilation, moisture rising from below your home could be the culprit. Moisture in the ground can rise through your subfloor area and enter the home, creating damp and mould problems that cause both health concerns and physical damage to your home and its furnishings.

Clear

Description

$1,936.00$3,322.00

Is your home excessively damp or mouldy and you cannot figure out why?

If you do not have subfloor ventilation, moisture rising from below your home could be the culprit. Moisture in the ground can rise through your subfloor area and enter the home, creating damp and mould problems that cause both health concerns and physical damage to your home and its furnishings.

Clear
SKU: SF Category: Tags: , ,

Description

Ventis Subfloor Ventilation System’s

A Ventis Subfloor System 1, 2 or 3 Fans works by creating a ventilation flow in the subfloor area. We do this using a fan unit to introduce fresh outside air in and expel subfloor air out.

The number of fan units can change based on the area and the levels of moisture present.

Water may pool after rainy weather, under your home, and then slowly evaporate and rise into the home.

Ventis Subfloor Ventilation effectively ventilates and expels this moisture, however you may need to look at solving the problem with drainage solutions to prevent water pooling in the first place.

Once you order we will contact you. We will help you check that the system you have chosen is going to work for your home to reach the optimal effect of your ventilation system.

We can install for you, just select the install in shipping option and we will arrange a pre-install check on your property.

Read more about it here – https://www.ventis.com.au/subfloor-ventilation/ 

Selecting your Subfloor System

Work out the estimate size of your subfloor volume by Length x Width x Average Height = M³

A Handy Hint is to use https://www.mapdevelopers.com/area_finder.php to work out the Square meters first!

Ventis Recommends at least 6 Complete air changes per hour, depending on the amount of moustuire.

A One fan system = Up to 90m³

A Two Fan system = Up to 150m³

A Three Fan System = Up to 210m³

WHY SHOULD YOU BUY FROM VENTIS?
  • Premium Germany Made Silent Series Fans
  • 5 years of onsite warranty
  • Ability to more outlets if needed later, or move duting to target areas
  • Support during the installation, including a custom design for your home.

Additional information

Weight 5 kg
Dimensions 62 × 29 × 30 cm
System

One Fan, Two Fan, Three Fan

Additional information

Weight 5 kg
Dimensions 62 × 29 × 30 cm
System

One Fan, Two Fan, Three Fan

Description

Ventis Subfloor Ventilation System’s

A Ventis Subfloor System 1, 2 or 3 Fans works by creating a ventilation flow in the subfloor area. We do this using a fan unit to introduce fresh outside air in and expel subfloor air out.

The number of fan units can change based on the area and the levels of moisture present.

Water may pool after rainy weather, under your home, and then slowly evaporate and rise into the home.

Ventis Subfloor Ventilation effectively ventilates and expels this moisture, however you may need to look at solving the problem with drainage solutions to prevent water pooling in the first place.

Once you order we will contact you. We will help you check that the system you have chosen is going to work for your home to reach the optimal effect of your ventilation system.

We can install for you, just select the install in shipping option and we will arrange a pre-install check on your property.

Read more about it here – https://www.ventis.com.au/subfloor-ventilation/ 

Selecting your Subfloor System

Work out the estimate size of your subfloor volume by Length x Width x Average Height = M³

A Handy Hint is to use https://www.mapdevelopers.com/area_finder.php to work out the Square meters first!

Ventis Recommends at least 6 Complete air changes per hour, depending on the amount of moustuire.

A One fan system = Up to 90m³

A Two Fan system = Up to 150m³

A Three Fan System = Up to 210m³

WHY SHOULD YOU BUY FROM VENTIS?
  • Premium Germany Made Silent Series Fans
  • 5 years of onsite warranty
  • Ability to more outlets if needed later, or move duting to target areas
  • Support during the installation, including a custom design for your home.

Additional information

Weight 5 kg
Dimensions 62 × 29 × 30 cm
System

One Fan, Two Fan, Three Fan

Description

Ventis Subfloor Ventilation System’s

A Ventis Subfloor System 1, 2 or 3 Fans works by creating a ventilation flow in the subfloor area. We do this using a fan unit to introduce fresh outside air in and expel subfloor air out.

The number of fan units can change based on the area and the levels of moisture present.

Water may pool after rainy weather, under your home, and then slowly evaporate and rise into the home.

Ventis Subfloor Ventilation effectively ventilates and expels this moisture, however you may need to look at solving the problem with drainage solutions to prevent water pooling in the first place.

Once you order we will contact you. We will help you check that the system you have chosen is going to work for your home to reach the optimal effect of your ventilation system.

We can install for you, just select the install in shipping option and we will arrange a pre-install check on your property.

Read more about it here – https://www.ventis.com.au/subfloor-ventilation/ 

Selecting your Subfloor System

Work out the estimate size of your subfloor volume by Length x Width x Average Height = M³

A Handy Hint is to use https://www.mapdevelopers.com/area_finder.php to work out the Square meters first!

Ventis Recommends at least 6 Complete air changes per hour, depending on the amount of moustuire.

A One fan system = Up to 90m³

A Two Fan system = Up to 150m³

A Three Fan System = Up to 210m³

WHY SHOULD YOU BUY FROM VENTIS?
  • Premium Germany Made Silent Series Fans
  • 5 years of onsite warranty
  • Ability to more outlets if needed later, or move duting to target areas
  • Support during the installation, including a custom design for your home.

Additional information

Weight 5 kg
Dimensions 62 × 29 × 30 cm
System

One Fan, Two Fan, Three Fan

Mini Cart 0

Your cart is empty.